How to Install Deadbolt Spade Connectors:

1. Unscrew the cap of the Deadbolt Spade Connector.
2. Feed the bare conductor of the speaker wire through the center hole of the connector.
3. Bend the strands of the speaker wire down around the teeth of the connector.
4. Screw the cap back on to secure the spade connector to the speaker wire.
5. Your Deadbolt Banana Spade connector is ready.

Spade connectors are a versatile alternative to banana plugs or wire crimps when setting up a modular home entertainment system. Easy to terminate and with a strong, clear connection, these spade connectors make any audio install a breeze.

Deployment is as simple as inserting your speaker wire, tightening down the crimping screws, and then plugging the connector into your audio devices. It couldn't be easier!

Fast-locking technology lets you quickly and easily terminate 10, 12, 14, 16, and 18 gauge speaker wire without soldering, crimping, or using screws. Fast-Locking works by using self crimping teeth which securely lock the spade connector to the speaker wire.

• SW-29995-6 6 pairs
• SW-29995-1 1 pair

• Deadbolt™ by Sewell

• 30° Spade Connector
• Six Pairs Per Pack
• 24k Gold Plated Brass
• Maximum accepted AWG: 8 AWG (10 AWG suggested)

• Spade "U" Opening: 8.5mm
• Spade "U" Height: 11mm
• Spade Width: 2.3mm
• The Outside Edge of the Connector: 13.85mm