15' long, wired straight through. Cut them in half to get 2 cords.
SOLID wire cable so you can punch it down (you shouldn't punch down stranded cable!)
You can make solid wire modular cords yourself, but this has to be faster, easier and cheaper!
These are professionally made and tested (which is why there's a mod plug on both ends).
Connect a modular device to a 66 or 110 block, beanie it on to an existing wire... lots of other uses.
Make you own Octopus Cable:
By plugging these Solid Wire Cords into the mod jacks on a phone system, gateway, ATA or other modular device, you can tie wrap them in a bundle towards the 66 Block, where it will look neat when you cut the wires down. With an Octopus Cable, you'll have extra wire for each of the mod cords, so your installation will look like a mess unless you spend a lot of time dressing the cable (somehow?).
White/Blue and White/Orange pairs wired straight through to four pin modular plugs, so you can cut it in half and get two 7.5 foot cords.
This CAT3 solid wire cord is wired with USOC wiring, with White/Blue on the middle pins and White/Orange on the outside pins.
Custom lengths available on request.