Monoprice Premium 3D Printer Filament Abs 1.75Mm 1Kg/Spool, Crystal Clear

SKU: MNP-11548
Unit Price
Quantity
Subtotal
US$ 46.76
US$ 46.76
US$ 46.481%
2
US$ 46.321%
3
Congratulations! You got a great price!
Add to cart Added
Checkout
Options
Brand
Filament type
Monoprice™ ABS
Print temperature (°c)
220-260
Bed temperature (°c)
110
Density (g/cm3)
1.04
Distortion temperature (°c, 0.45 mpa)
78
Melt flow index (g/10 min)
12 (220°C/10kg)
Tensile strength (mpa)
43
Elongation at break (%)
22
Bending strength (mpa)
66
Flexural modulus (mpa)
2348
Izod impact strength (kj/m2)
19
Filament Comparison Chart
Description

Get outstanding 3D printing results when you use 1.75mm ABS 3D Printer Filament from Monoprice™!

ABS is one of the most commonly used filament types in 3D printing. It has a high tensile strength and good overall toughness. It has a low density and is softer than PLA, which means lower weight and lower cost when printing large models. Hardness is such that no white dot appears when bending.

This 1 kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.05mm. It has a nominal processing temperature of 230°C (446°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament.

The negatives of using ABS is that it can give off a white smoke with a concentrated odor. It is best to ensure that the printing room is well ventilated when using ABS.

Additionally, it has a high moisture absorption rate. Depending on the overall humidity level of the printing environment, an opened spool can absorb enough moisture after a couple of days that high temperature printing could cause bubbles or pocks in the extrusion. It is therefore recommended to not open a spool until you are ready to print and to store any unused portion with with silca gel and/or an active dehumidifier to reduce the amount of moisture it can absorb.





WARNING: This Filament ‑ when used in the operation of 3D Printers or 3D Pens ‑ can expose you and others in the same room to styrene, a chemical known to the State of California to cause cancer.

www.P65Warnings.ca.gov.

ALWAYS OPERATE THIS PRODUCT IN A WELL-VENTILATED AREA.


Shipping from
This product is shipped from our supplier's warehouse in Rancho Cucamonga, CA, United States
Our guarantee
This product is brand new and includes the manufacturer's warranty, so you can buy with confidence.
A 25% handling charge is levied against all authorized returns except those due to our error. Unauthorized returns are subject to a 40% handling charge. Damages & defects must be reported to us within 14 days.
LOADING ...
Customers Who Bought This Item Also Bought
You recently viewed items