Monoprice Mp Select Abs Plus+ Premium 3D Filament, 1Kg 1.75Mm, Black

SKU: MNP-15848
Unit Price
Quantity
Subtotal
US$ 45.25
US$ 45.25
US$ 44.981%
2
US$ 44.821%
3
Congratulations! You got a great price!
Add to cart Added
Checkout
Options
Brand
Filament type
Monoprice™ ABS+
Print temperature (°c)
220-260
Bed temperature (°c)
110
Density (g/cm3)
1.06
Distortion temperature (°c, 0.45 mpa)
73
Melt flow index (g/10 min)
15 (220°C/10kg)
Tensile strength (mpa)
40
Elongation at break (%)
30
Bending strength (mpa)
68
Flexural modulus (mpa)
2443
Izod impact strength (kj/m2)
42
Filament Comparison Chart
Description

Get outstanding 3D printing results when you use 1.75mm ABS Plus+ 3D Printer Filament from Monoprice™!

ABS Plus+ is an upgrade of ordinary ABS filament, which is one of the most commonly used filament types in 3D printing. It is 40% stronger than ordinary ABS filament and has good overall toughness.

This 1.0kg spool features a thickness of 1.75mm ±0.10mm, with a roundness variation of only 0.05mm. It has a nominal processing temperature of 210 ~ 240°C (410 ~ 464°F). Thickness and roundness factors are laser measured at the factory to ensure accuracy over the entire length of the filament.

The negatives of using ABS Plus+ is that it can give off a white smoke with a concentrated odor. It is best to ensure that the printing room is well ventilated when using ABS.

Additionally, it has a high moisture absorption rate. Depending on the overall humidity level of the printing environment, an opened spool can absorb enough moisture after a couple of days that high temperature printing could cause bubbles or pocks in the extrusion. It is therefore recommended to not open a spool until you are ready to print and to store any unused portion with silca gel and/or an active dehumidifier to reduce the amount of moisture it can absorb.




Monoprice™ and all Monoprice logos are trademarks of Monoprice Inc.



WARNING: This Filament ‑ when used in the operation of 3D Printers or 3D Pens ‑ can expose you and others in the same room to styrene, a chemical known to the State of California to cause cancer.

www.P65Warnings.ca.gov.

ALWAYS OPERATE THIS PRODUCT IN A WELL-VENTILATED AREA.


Shipping from
This product is shipped from our supplier's warehouse in Rancho Cucamonga, CA, United States
Our guarantee
This product is brand new and includes the manufacturer's warranty, so you can buy with confidence.
A 25% handling charge is levied against all authorized returns except those due to our error. Unauthorized returns are subject to a 40% handling charge. Damages & defects must be reported to us within 14 days.
LOADING ...
Customers Who Bought This Item Also Bought
You recently viewed items