Ghost Wire 2.0, Super Flat Adhesive Wire, 16 Awg (2 Conductor) Or 18 Awg (4 Conductor), White

Full product line
Click here to see full product line

Make speaker wires disappear right on the wall or under the carpet with Sewell Adhesive Speaker Wire. This super-flat speaker wire can be used on almost any flat surface.

Perfect for running stereo signals across rooms, around corners, in automobiles, under flooring, or any situation where wires cannot be run through walls.

White backing allows wires to be simply attached and left uncovered, or it can be easily covered with paint, spackle, or flooring making the wire virtually invisible.

For an even cleaner install, we recommend using theto connect the Ghost Wire to your regular speaker wire.

Tutorials How to Terminate Ghost Wire
  1. Peel back the white backing about 1” and cut it off, exposing the adhesive and conductors.
  2. Trim away white covering in between and at the edges of the conductors.
  3. Remove the white covering from the opposite side of the conductor. It does not have adhesive between the conductor, and should leave a nice clean copper surface when removed.
  4. Fold the conductors 2-4 times, keeping the clean copper surface outwards.
  5. Insert the conductors into the and tighten the set screws.
  6. Insert your standard speaker cable in the other end of the terminal block and tighten the set screw.

How to Remove Bubbles from Ghost Wire
  1. Install the ghost wire onto a clean surface, pulling it tight as you do.
  2. Use a heat gun on low or hair dryer on high to heat the area where bubbles appear
  3. Smooth out the bubbles by rubbing back and forth over them. Use a glove if the heat is uncomfortable.

Running Ghost Wire Around Corners

We’ve had a lot of people ask us how to make 90° turns when running it along the floor.

Here’s how:

  1. Run the cable along the edge of the wall with the adhesive side facing down
  2. Fold the cable back so the copper strips are facing up
  3. Fold the cable back down at a 45° angle, making a 90° turn
Mfg. Part Number
  • SW-32985-25 25 ft. 2 Conductor
  • SW-32985-50 50 ft. 2 Conductor
  • SW-32985-100 100 ft. 2 Conductor
  • SW-32986-25 25 ft. 4 Conductor
  • SW-32986-50 50 ft. 4 Conductor
  • SW-32986-100 100 ft. 4 Conductor
  • Ghost Wire™ by Sewell
  • .375" Width (each conductor)
  • .5 mm thick (includes peel back layer, adhesive, and conductors)
  • 16 AWG (2 conductor)
  • 18 AWG (4 conductor)
  • Pure Copper
  • 2 Conductor or 4 Conductor
  • White Jacket
  • Rated up to 10 Amps
  • Indoor Use
  • Home Theater Surround Sound Speaker Wiring
  • Low Voltage Stage Lighting
  • 12 Volt Cabinet Lighting
  • Security Access Control Wiring
Shipping from
This product is shipped from our supplier's warehouse in , UT, United States
Our guarantee
This product is brand new and includes the manufacturer's warranty, so you can buy with confidence.
A 25% handling charge is levied against all authorized returns except those due to our error. Unauthorized returns are subject to a 40% handling charge. Damages & defects must be reported to us within 14 days.
Customers Who Bought This Item Also Bought
You recently viewed items