Hd-Link Hl21, Hdmi Extender/Matrix, 390Ft

Customizable Matrix

A pre-configured matrix may not fit all the needs of your setup, but the HL21 has the versatility to become the most useful tool in your setup sending your signal anywhere, from any place.

It can be used by itself as a simple "point-to-point" setup using a regular Cat5e/6 cable, or as a customized matrix setup by combining it with a dedicated Gigabit Network Switch and additionaland

The kit comes as a pair, with one sender unit and one receiver unit.

1. Simply connect the units together with one Cat5e/6 cable. If you are creating a custom matrix, connect all units to a dedicated network using a gigabit switch.
2. Connect your HDMI cables from the sender and receiver units to their respective display or source device.
3. Plug in the included power supplies.
4. Optional: Connect the included IR cables in the labeled ports to control your source device from the display location.
5. Optional: Connect RS232 cables to utilize the RS232 pass-through.
6. Your HDMI extension is now ready.

The Matrix customization can be set with the easy-to-use channel system. You can assign a certain channel to a sender and tune in as many needed receivers to that same channel. You can change the channels for each sender/receivers manually on the units themselves, or through a web application by accessing the HL21's IP address on the network.

The HL21 will work from a point to point setup by connecting straight from the sender to the receiver, but that was not the main reason for designing this product. While usually the kits are sold together, the main benefit of the HL21 is the ability to configure a matrix-type setup which requires the use of a Gigabit Network Switch. Since this device can extend over "IP" it can have up to 64 receivers with the potential of over 250 different senders (Note:this is contingent upon the capabilities of the network.)

andare available for purchase separately so you can fully customize the kit to fit your needs.

• SW-32962 Kit
• SW-32962-RX Receiver
• SW-32962-TX

• Link by Sewell

• Extends HDMI, IR, and RS232
• H.264 Compression
• TCP/IP Support (Many to Many)
• Single Cat5e/6
• Local Loop Out
• LED Display
• PC Control (through a web app)

• HDMI 1.3, HDCP 1.4
• Resolution: up to 1080p
• Operation Distance: up to 390 ft (120m)
• IR Frequency: 38-56 kHz
• Power Supply: DC 5V 1A

• HDMI Extender Transmitter
• HDMI Extender Receiver
• IR Transmitter
• IR Receiver
• (2) IR Receiver (For control of the extender)
• (2) 5V DC Power Supply
• Mounting Hardware
• (2) IR Remote

• HDMI Extender Receiver
• (2) IR Receiver Cable
• 5V DC Power Supply
• IR Remote
• Mounting Ears
• Phoenix Adapter

• HDMI Extender Transmitter
• IR Emitter Cable
• IR Receiver Cable
• 5V DC Power Supply
• IR Remote
• Mounting Ears
• Phoenix Adapter