The Light-Link is a USB 3.0 Fiber Optic Cable. Because it uses fiber, it can send the signal instantly with no perceptible latency at much longer distances than regular USB extenders.
Note: The 50 and 100 ft versions of this cable are compatible with devices that are USB 2.0 as well as USB 3.0, but it has to be plugged into a USB 3.0 port in order to function! The 30 ft is currently only compatible with USB 3.0 devices.
How it works
The converters inside the cable heads convert incoming electrical signal into optical on one end, and back into electrical on the other end. The Light-Link is composed of two fiber cables and two copper cables. The copper cables are used for non-data information such as +5v power for USB devices. The fiber strands carry all the data information.
The light travels down the fibers using internal reflection, which allows the light to bounce off the cable walls similar to a bobsled. Light travels extremely fast (186,000 miles a second) so the signal arrives almost instantly without losing any quality.
Eliminates possible points of failure
In a typical long distance USB extension setup, you have many potential points of failure (source to sender, receiver to device, an RJ45 cable in between, and two power adapters for the baluns). The Light-Link extends the signal with zero latency and without having to worry about baluns or power adapters.
Optional Extra power
The Light-Link USB features a micro USB-B port to provide Auxiliary power for devices that require a little more power than usual. (Not required for most devices)
Using with Oculus Quest?You will need a
Works with Oculus Quest and Quest 2.
Does not work with the Valve Index VR Headset
Mfg. Part Number
- SW-33042-30 30 ft.
- SW-33042-50 50 ft.
- SW-33042-100 100 ft.
- Link by Sewell
- Length: 30ft
- Up to USB 3.0 speeds 5Gbps
- Recommended minimum bend radius is about 4 cm when not under tension or about 8 cm when under tension.